
Spa removal in Sydney with OTG starts from $1,650 including GST. A spa cannot be carried out like furniture: a portable acrylic spa typically weighs over 200 kg empty, so our crew cuts it into sections on site. Size, how it is installed and backyard access set the final price, which we confirm before work starts.
Many people who ring us about a spa expect a price close to a lounge pickup and are surprised by the real figure. Two people carry a lounge to the truck in one piece. A spa is a dismantling job.
One spa maker lists a dry weight of 210 kg for its three-seat model and 360 kg for its seven-seater, before any water goes in. Figures vary by brand, size and age.
The shell is an acrylic sheet reinforced with fibreglass and resin, one rigid moulding that has to be cut where it sits. Around it are timber or plastic cabinet panels, foam insulation, a frame, pumps, a heater, a control box and the pipework. Each part comes off separately and goes out by hand.
The power does. In NSW, electrical wiring work needs a licence regardless of the cost of the job, and removing fixed equipment counts as wiring work. A hard-wired spa must be disconnected and made safe by a licensed electrician before our crew arrives. A spa that runs from a plug in a power point only needs switching off and unplugging.
Drain it as well. Sydney Water says chlorinated pool and spa water must go to the wastewater system, not stormwater, so keep the hose away from the street gutter. Disconnecting the spa’s own pipework is part of our job. If the spa will still be full on the day, tell us when you ask for a quote.
The starting price suits a freestanding spa with a short, level carry to the truck. These factors move a quote up.
| Factor | Effect on the quote |
|---|---|
| In-ground or sunken spa | Higher. The shell is cut out from inside its surround, which is slower than working around a freestanding unit. |
| Decking built around the spa | Higher. Boards are lifted or cut back first, and the decking adds to the load if it is going too. |
| No side access | Higher. Every section goes through the house, in smaller pieces. |
| Stairs | Higher with each flight, because every load uses them. |
| Carry distance | Higher where a long driveway or permit parking keeps the truck away from the spa. |
| Crane | Cutting the shell on site normally replaces a lift. |
| Swim spa | Much higher. One manufacturer lists a 5.9 metre swim spa at 1,414 kg dry, several times the material of a family spa. |
Access and volume shape every job we price, as explained in our guide to rubbish removal costs in Sydney.
Our spa removal service covers the crew, the truck, disconnecting the pipework, breaking the shell down, carrying everything out and disposal. The pumps, heater and cover go with it. Surrounding decking can be included if you mention it when you ask for the quote.
The electrician is not included. For an in-ground spa, describe the surrounds and what you want left behind when you ask for a quote, because we haul material away and do not bring machinery.
If the spa works and access is clear, try selling it or giving it away with the buyer collecting. It costs you nothing but time, and it is the better choice when it works out.
The limits are practical. The buyer has to move the spa whole, which takes several people, a trailer and a path that fits it on its side. The seven-seater in the specifications above is 2.2 metres square and 900 mm high. A hard-wired unit still needs an electrician. A spa with a dead heater, a cracked shell or a deck built around it is hard to give away, and that is when paid removal makes sense.
Not in one piece. Council bulky waste collections set size and weight limits that a whole spa breaks. Georges River Council’s Bulky Waste Collection excludes items three people cannot lift and anything longer than 2 metres. Hornsby Shire Council’s conditions allow no item longer than 2 metres, and two people must be able to lift each item easily.
The seven-seater in the specifications above is 2.2 metres square and 360 kg dry, over both limits, and even the 210 kg three-seater is far more than two or three people can lift. Neither council lists spas by name. If you plan to cut one up yourself, ask your council first whether the sections will be accepted. Our guides to the Georges River and Hornsby collections set out the full rules. We are a private, paid company and cannot book a council collection for you.
The shell is the difficult part. University of Sydney researchers reported in 2023 that most carbon and glass fibre composite waste goes to landfill or is incinerated, even though recycling methods exist. Pumps, heaters and other metal parts can be separated as scrap metal, but the shell itself has few recycling outlets.
Our spa removal starts from $1,650 including GST. The final price depends on the size of the spa, how it is installed and the access to your backyard. A sunken spa, a decked-in spa or a swim spa costs more than a freestanding one. We confirm the figure before any work starts.
Furniture leaves in one piece. A portable spa typically weighs over 200 kg empty and is built from a fibreglass-backed acrylic shell, cabinet panels, foam, pumps and pipework. It has to be cut into sections where it sits and carried out load by load.
If the spa is hard-wired, yes. NSW requires a licence for any electrical wiring work, including removing fixed equipment, so a licensed electrician has to disconnect the spa before we arrive. A spa that plugs into a power point can be switched off and unplugged by you.
Yes. We remove built-in and in-deck spas as well as freestanding ones. Expect a quote above the starting price, because the decking or surround has to be opened up before the shell can be cut out. Photos help us price it.
It can be. A buyer who collects costs you nothing, but they have to move 200 kg or more in one piece, which takes several people, a trailer and a wide enough path. For a dead or boxed-in spa, paid removal is the realistic option.
Tell us the size of the spa, how it is installed and how we reach it, and the job is quoted up front before anything is loaded. Call 0429 222 344, send the details online, or see how our spa removal jobs run.
